Effect of lanthanum doping on water content and diffusion properties of corundum for producing transparent ceramics

The effect of doping corundum with lanthanum on the content of water and other gas impurities, on the diffusion characteristics, on the unit cell size and static strength of fine-crystalline corundum synthesized under thermovapours conditions in a supercritical water fluid was studied.Content, release and diffusion coefficients of water and other volatile impurities in corundum were measured by kinetic thermodesorption mass spectrometry. Water is the main volatile impurity in fine-crystalline corundum. It was found that the introduction of lanthanum into the structure of corundum reduces several times the content of water and other gas-liquid impurities. An increase in the diffusion coefficient of water during the doping of corundum with lanthanum leads to an increase in the degassing rate of fine-crystalline raw materials. When doping corundum, lanthanum, being localized in structural defects, not only displaces structural hydroxyl groups with the formation of strong aluminate-like bonds, but also decreases in the unit cell and increases in the average static strength of the crystals. La-doped corundum, due to the reduced content of water and other gas impurities, is a promising raw material for the production of transparent ceramics.     

基于灰色关联度的微孔端面机械密封开启力共性影响参数分析

目前微孔端面机械密封采用的几何参数繁多,缺乏明确物理意义。为找出跨孔型的共性几何参数,基于Fluent多相流空化模型,针对矩形孔、菱形孔、椭圆孔端面机械密封,建立密封间隙流体的三维数值计算模型,计算得到144条开启力数据;在分析开启力和几何尺寸之间的关系、额外开启力产生机制的基础上,提出等效长度和等效宽度2个具有物理意义的几何参数;采用灰色关联度分析法,分析和验证等效长度、等效宽度、方向角、面积比对开启力的影响,发现4个因素对3种微孔密封的间隙流体开启力都有影响,但等效长度与等效宽度的影响较方向角、面积比大。     

Electrical conductivity of poly(vinyl alcohol)/carbon nanotube multilayer thin films: Influence of sodium polystyrene sulfonate mediated carbon nanotube dispersion

This investigation was aimed to enhance the dispersibility of multi-walled carbon nanotubes (MWCNT) using sodium polystyrene sulfonate (Na-PSS) polyelectrolyte. Subsequently, electrically conducting, multi-layer thin films are prepared utilizing layer by layer assembly method with poly(vinyl alcohol) as a host matrix. The highest extent of MWCNT dispersion was observed in MWCNT:Na-PSS ratio of 1:9 (wt/wt), which was estimated from UV-Vis spectroscopic analysis. Zeta potential measurements of Na-PSS modified MWCNT dispersion showed large negative potentials ranging from −52 to −64 mV in the most stable pH range of 4 to 10, suggesting the colloidal stability is due to the long-range repulsive nature of electrostatic interactions from negatively charged sulfonate groups. Complementary molecular dynamics simulations showed that adsorption of Na-PSS imparts a large negative potential to the carbon nanotube surface, which increases with an increase in Na-PSS concentration. The multi-layer thin film of (1:9) MWCNT:Na-PSS exhibited a DC electrical conductivity of 2.96 × 10² S/m.     

Densely connected convolutional network block based autoencoder for panorama map compression

As a novel virtual reality (VR) format, panorama maps are attracting increasing attention, while the compression of panorama images is still a concern. In this paper, a densely connected convolutional network block (dense block) based autoencoder is proposed to compress panorama maps. In the proposed autoencoder, dense blocks are specially designed to reuse feature maps and reduce redundancy of features. Meanwhile, a loss function, which imports a position-dependent weight item for each pixel, is proposed to train and adjust network parameters, in order to make the autoencoder fit to properties of panorama maps. Based on the proposed autoencoder and the weighted loss function, a greedy block-wise training scheme is also designed to avoid gradient vanishing problem and speed up training. During training process, the autoencoder is divided into several sub-nets. After each sub-net is trained separately, the whole network is fine-tuned to achieve the best performance. Experimental results demonstrate that the proposed autoencoder, compared with JPEG, saves up to 79.69 % bit rates, and obtains 7.27dB gain in BD-WS-PSNR or 0.0789 gain in BD-WS-SSIM. The proposed autoencoder also outperforms JPEG 2000, HEVC and VVC in both BD-WS-PSNR and BD-WS-SSIM. Meanwhile, subjective results show that the proposed autoencoder can recover details of panorama images, and reconstruct maps with high visual quality.     

小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

Revealing Electrical-Poling-Induced Polarization Potential in Hybrid Perovskite Photodetectors

Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical-poling-induced ion migration, accounting for many unusual attributes and thus performance in perovskite-based devices, remain comparatively elusive. Herein, the electrical-poling-promoted polarization potential is reported for rendering hybrid organic–inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus-assisted solution-printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical-poling-induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical-poling-triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion-migration-produced polarization potential may represent an important endeavor toward a wide range of high-performance perovskite-based photodetectors, solar cells, transistors, scintillators, etc.     

低活化马氏体钢热变形行为及机理型本构建模研究

利用Gleeble-3500热模拟试验机研究了低活化马氏体钢在变形温度为850～950 ℃、应变速率为0.001～1 s^-1条件下的热变形行为。建立了流变应力本构方程，并评估了该方程的预测能力。绘制了低活化马氏体钢在不同应变下的热加工图。结果表明：在较高的应变速率条件下，该材料主要发生动态回复，在较高变形温度和较低应变速率下具有明显的动态再结晶特征；本构方程的预测结果与实验结果符合良好；变形温度870～930 ℃、应变速率0.001～0.01 s^-1和变形温度920～950 ℃、应变速率0.3～1 s^-1分别是真应变为0.4和0.6下最优的热加工区域。